Cooling / heating & hot water2018-08-24T10:54:40+08:00

Air source heat pump – cooling / heating & hot water
an integrated heat pump with heating & air conditioning function
heating in winter and cooling in summer
the same time supply hot water.

clitech air to water site header-min
  • Compact structure and sound control design, no trouble to neighbours.

  • Branded componenets, heart compressor as top one America scroll Copeland, Japan saginomiya four way valve, Emerson expansion valve.

  • Environment friendly HCHF refrigerant  as R410A / R417A / R407C, 

  • Quick-mind LCD controller, could be installed against wall, one touch ON enjoy automate heating and hot water, timer ON/OFF function available.

  • Automatic anti-freeze function and defrosting control, it takes self-protection when install outside in winter.

  • auxiliary electric heating control possible when your model choose smaller a little.

  • 220V/50HZ, 380V/50HZ, 440V/60HZ special power source is available.

Technology changes life!
We concern your living feeling, also concern your electricity bill

Branded components

Standard features

  • Energy saving efficiency remarkable This CAM series are for two functions, in the summer it can provide the same time with air conditioner cooling and sanitary hot water, so the combinative COP+EER is higher than 7.9, that is to say, sanitary hot water is provided freely when using the air conditioner, reduced the running cost. 

  • Multiple functions. Compared with other units, Clitech air conditioner and water heater integrated unit has been equipped with excellent functions. In the summer it can provide you with three functions of sanitary hot water separately, air conditioner separately and hot water with air conditioner cooling the same time. In the winter it can provide sanitary hot water and air conditioner heating. Our unit can satisfy users demands in any place. 

  • Reliable running Clitech CAM series adopts whole sealing scroll compressor, high efficiency and energy saving, running reliable, excellent performance. Equipped with high efficiency hydrophilic aluminum and rifled pipe copper pipe finned heat exchanger, lower rotate speed fan, assuring the unit running to be more reliable and stable.

  • Saving your cost CAM series can provide cooling and heating two functions, no need of cooling tower, boiler or any relative unit, so it reduced the initial investment cost and everyday running cost, very easily solved the questions of cooling and sanitary hot water. 

  • Wide application Clitech heat pump CAM series with the advantages of low energy consumption, low nose and easy installation, can satisfy any needs of industrial and commerce. Besides normally provide air conditioner cooling, it also can be heating system of sanitary shower hot water, widely applicable in hotels, dinning rooms, superstores, offices and so on.

CAM heat pumps 5 working mode

  • Mature design
    Adopt “Solkane 5.0” software to calculate heating, “Airsoft” software to calculate heat exchanger design, “system Design Simulator” to calculate cooling system capacity, to assure system match reasonable.

  • Reliable technology
    Nitrogen filled protection when welding, high pressure Nitrogen to keep pressure and electronic halogen detection for assure system no leaking.
    Pipe take shock absorber design, and take protector to assure pipe never get worn out.
    Wire lines atke insulation protection, assure never because of wire aging and get short circuit.

  • Reliable test
    Before delivery, unit has get through full test for safety, high temp, low temp, defrosting condition, assure unit run safely, stable and high efficient.

  • Suppress frosting and defrosting technology
    Supress frosting: Evaporator takes big air flow design, special allocate technology assure every refrigerant loop the same flow.
    Somre units adopt single row heat exchanger, improved heat exchange efficiency and decreased frosting form speed, adopt wave type high efficient fin, to assure frosting won’t block flow.
    Defrosting technology: Adopt PID defrosting technology of “time + temp difference change rate”, to assure defrosting in time and clean.

  • Refrigerant pressure control technology.
    Adopt patent produced refrigerant pressure buffer system, making the refrigerant system keep stable at different ambient temp and water temp.

Multiple models for chosen

CAM-12XB CAM-16XB CAM-20XB CAM-24XB CAM-28XB
CAM-40XB CAM-48XB CAM-60XB CAM-80XB CAM-100XB
 Model CAM-12XB  CAM-16XBCAM-20XBCAM-24XB CAM-28XB CAR-40XB CAM-60XB CAM-80XB CAM-100XB
 AC heating with hot water       
 Heating capacity  11 14.8 19 22 30.4 38 57 76 90
 Hot water output T/H 0.24 0.32  0.41 0.48  0.66  0.82  1.23  1.63 1.94
 Input power KW  2.44 3.2  4.07 4.88 6.52   8.15  12.22  16.74  18.66
 AC cooling with hot water
 Cooling capacity kW 7.8 10 13 15.6 20.8 25.9 38.9 51.9 69.3
 AC water flow M3/H 1.34 1.72 2.24 2.68 3.59 4.45 6.69 8.92 10.53
 Heating capacity KW 10.5 14.5  16.5 21 26.4  33 49.5 66 77.6
 Hot water output T/H 0.22 0.27 0.35 0.42 0.58 0.7 1.06 1.4 1.7
 Input power KW 2.3 3.1 3.7 4.6 5.92 7.4 11.17 14.9 17.3
 EER+COP 7.96 7.88 7.97 7.96 7.96 7.96 7.91 7.91 8.02
AC cooling
 AC cooling capacity KW 7.44 9.8 12.4 14.88 19.84 24.8 37.19 49.6 66.2
 Input power KW 2.58 3.4 4.3 5.16 6.88 8.6 12.96 17.3 22.4
 Power source  220V/1N/50HZ 380V/3N/50HZ
 Noise level dB(A) <50 <54  <55 <55 <55   <55 <58 <60 <60
 Unit weight Kg 110 165  175 220  340 340 630  830 930
 Unit size W x D x H cm  71x71x81 81x78x105 81x78x105 130x64x74 130x64x74 145x78x105 170x90x125 200x103x209220x103x209
 Connection pipe size DN DN20 DN25 DN25DN25 DN32 DN32 DN38 DN50 DN50
 Test conditions:1.Rated cooling working condition: 1.Air source side inlet water temp is 35℃, AC side inlet water temp is 12℃, outlet water temp is 7℃
2.Rated heating&hot water condition: Air source side DB/WB is 20℃/15℃,initial hot water temp 15℃, ending hot water temp 55℃;AC side inlet water temp 40℃,outlet water temp 45℃. 3.Rated cooling&hot water working condition: initial hot water temp 15℃,ending hot water temp 55℃;AC side inlet water temp 12℃,outlet water temp 7℃.

More options for CAR-XB air source heat pump

Stainless steel casing

Protect heat pump

Casing setting

Stainless steel casing is used to protect heat pump outcasing from rust install outside, the standard is galvanized steel casing with painting of white

Soft starter apparatus

Protect compressor

Adding on

With soft starter the machine will temporarily reduce the load and torque in the power train and electric current surge of the motor during start up.

Bottom heater

Protect heat pump

Adding on

Bottom heater is electrical tapes installed by heat pump bottom, when winter cold there water by the bottom, may start the bottom heater to avoid freeze.

RS485 protocal

Technical adding

Adding on

RS485 protocal is a technology which can share information to the computer, clitech CAR-XB series heat pump can put this port.

Ask us for price and solutions today!
Your inquiry will be replied within 24 hours, and we value your privacy.

Contact us